or call +91 91766 77448

Walk-In/ Drive-In Test Chambers

Offering in Various Sizes

Walk-In/ Drive-In Test Chambers

HIACC design & assemble a wide range of walk-in/drive-in test chambers. The construction model includes Integral Welded Floors, Pre-Fabricated Modular Panel construction and Compact Walk-In chambers. The Integral welded floors is adopted for heavy-duty testing with ramp rate more than 10°C/min and is ideal for high soak period testing. This is customized as per customer’s requirement.

The Pre-Fabrication Modular Panel Construction is the most commonly used construction type for walk-in chambers. The structure can be assembled in a short period and provide floor loading up to 5 tones. The chamber is equipped with urethane insulations, moisture seals, dry & frost-free test space, lightings and touchscreen controller.

The Compact Walk-In Chambers are made on our KLIMA platform which is suitable for medium-size specimen testing such as PV module testing. The chamber has a smaller footprint area and is energy efficient.

Temperature Range: -70˚C to +180˚C (Cascade) & -40˚C to +180˚C (Single)
Humidity Range: 10% RH to 98% RH
Slide-Out, Adjustable Product Shelf
Lockable, One-Handed Door Latch
Two 4″ (100mm) Circular Port Plugs
TCP/IP and Serial Communication
Frost-Free Operation
Non-Settling Rigid Stone Wool Insulation
Heavy-Duty Swivel Casters with Leveling Pads
Energy Saving Refrigerants R404A and R23
Durable Silicone Door Gasket
Fog-Free Tempered Heated Viewing Window with Interior Light
Continuous TIG Welding 304 Stainless Steel Interior Liner
Easy Maintenance with Three-Sided Access to Components

Quick Installations, Reliable Performance & Affordable Service

Klima is customizable to conduct testing as per your choice. Below are some of the frequently used test standards in Klima.

IEC 60068 - 2 - 30, 2005, Environmental testing Part 2-30:, Tests: Damp heat, cyclic,

IEC 60068 - 2 - 78, 2012, Environmental testing Part 2-78:, Tests: Damp heat, steady state

IEC 60068 - 2 - 1, 2007, Environmental testing Part 2-1:, Tests: Cold

IEC 60068 - 2 - 2, 2007, Environmental testing Part 2-2:, Tests: Dry heat

IEC 60068 - 2 - 14, 2009, Environmental testing Part 2-14: Tests: Change of temperature

IS 9000 Part II Sec. 1 to 4, 1977 & Sec. 1 to 5, 1977, Basic climatic test procedures, Part 2:Cold test Part 3: Dry heat test

IS 9000 Part IV, 2008 & Part V Sec. 1 & 2, 1981 Basic climatic test, Part 4: Damp heat, steady state, Part 5: Damp heat, cyclic test.

IS 9000 Part VI, 1978, Basic climate test, Part 6: Composite temperature/humidity cyclic test.

Technical Specifications

Get in touch with us to discuss your specific requirements.

Options

(Special accessories on customer request)

Additional Port Holes: Choose from 50mm, 100mm, 125mm, and 150mm port holes to accommodate various connections.

Customizable Floor Loading Capacity: Tailor the chamber's floor loading capacity to meet your specific requirements.

Air Dryer for Low RH Applications: Ensure precise humidity control with an air dryer designed for low RH applications.

Heavy-duty Customized Shelves: Opt for heavy-duty shelves customized to support your specific testing needs.

Water-Cooled Refrigeration Systems: Enhance cooling efficiency with water-cooled refrigeration systems.

Remote Refrigeration/Condensing Unit: Access flexibility and convenience with a remote refrigeration/condensing unit.

Booster Cooling through LN2: Achieve ultra-low temperatures down to -150°C with booster cooling through LN2.

Touchscreen Controller

Experience seamless control with HIACC’s flagship Touchscreen Controller, designed to simplify even the most complex testing procedures. Featuring USB access and Ethernet connectivity, this controller offers unparalleled flexibility.

Here are some of its key features: